|
Pioneer DJM-600 Professional DJ Mixer (Silver)
|
Item #: 453504027
Price: $1,099.00
Retail price: $1,099.00
|
| Auto BPM Counter Equipped with a counter that automatically measures and digitally displays a track's BPM measurement range: 70-139 / 91-180 / 71-180 / Manual. The DJM-600 provides a visual confirmation of a track's tempo to allow the user to merge one song into another smoothly. Also - BPMs of tracks that are difficult to measure can be manually input by tapping on the TAP button. Auto Beat Sampler This is a new DJ function that allows you to sample your favorite sources and play them back easily at the touch of a button. The BPM is measured digitally and recorded automatically exclusively for designated beats (1 / 2 / 4 / 8 / 16) beats - Maximum interval: 6 seconds. If set to the Stand-By mode when no sound is present - the function automatically starts and stops recording in response to the presence and absence of the input signal and achieves the correct sampling with perfect timing. What's more - the user can edit the end position - making possible a wide diversity of playback effects by making use of three playback mode options and the cross fader start. Single Play: Plays back the recorded sound once only when the button is being pressed. Loop Play: Plays back the recorded sound repeatedly when the button is pressed. Stretch Loop Play: Extends or shortens the recorded sound in accordance with the mixed track's BPM and plays back the sound repeatedly. Auto Beat Effector Linked to BPM - the DJM-600 can add effects to each CH - MIC and MASTER independently. The user can produce music that makes full use of high-level DJ techniques by performing quick setting with the Beat Unit Switch button - adjusting the precise time parameters - or controlling the balance between the effect sounds and the original sounds by varying the mix ratio. Moreover - even when using the fader - it is possible to leave just the effect sounds without linking to BPM. Delay: Repeats a sound once. The user can set the delay to their desired tempo. Echo: Repeats a sound several times. The user can set the echo sound to their desired tempo. Auto Pan: Automatically shifts the sound to the right and left. Also capable of short auto pan sequences that would be impossible via manual operation. Auto Trans: Periodically cuts the sound. Auto Filter: Periodically varies the sound color. Flanger: Periodically reproduces a sound effect resembling a jet airplane ascending and descending. Reverb: Reproduces a reverberating sound effect. Pitch Shifter: Allows the interval to be freely varied throughout a range of +/-1 octave. With this - the user can compensate for interval changes when using analog turntables or for tempo changes when different makers' CD players are used. Additionally - choruses can be made by employing mix ratios. External Effect Input (Send/Return): Allows the user to connect the mixer to an external effector or sampler - etc. Headphone Monitor Split When the Headphone Output switch is set to MONO SPLIT - the right channel becomes the master and the left channel becomes the CH sound. Choosing Plural with the headphone cue - the user can also hear mixed sound. Moreover - this function can perform right and left level adjustment - thereby making monitoring easier. Fader Start Play Connected to the CDJ Series - the DJM-600 can begin playback of a track using the sliding cross fader or the channel fader. It can mix tracks without creating spaces by setting the stand-by track's cue point and performing a single-action cut-in. Since it returns to the cue point via the back fader alone - sampler-style playback is also possible. Start/back play of sources recorded using the built-in sampler is also possible using the cross fader. Equalizers The DJM-600 is equipped with a separate HI/MID/LOW 3-band equalizer for each channel. This arrangement allows the stress of the instrument sounds to be adjusted within the range -26dB to +12dB for an improvement of about 100% (Pioneer comparison) in sound extraction Other Features Cross Fader Curve: Choose from three types of cross fader start-up option. Talk Over: Mutes -14db all levels apart from the microphone. Peak Level Meter: Allows the user to instantly determine the source input condition for each channel to make possible certain operation without loss time. Trim: Track input level composition is available. This function is compatible with diverse sound sources. Independent Monitor Switch: Enables independent or simultaneous monitoring of each CH - MIC - MASTER and EFFECT. Booth Monitor Output: Utilizing independent output terminals for booth monitor use - this function allows the sound volume to be independently controlled at the upper surface. Recording outputs (RCA) All faders - knobs - volume controls - buttons are highly durable |
|
|
